|
se sd | i need to import nmea to a 2630 from a 2011 NH intellisteer ready tractor. it has the intelliveiw 3 display. there is a cable coming from the "b" port on the reciever to a serial port connector in the cab. i have that hooked up with my serial port cable and the 2630 set up to accect it in com port 1. i have tried to change the nmea messages from the reciever to output gsa gga and rmc but cannot get gps into the display. i am not familiar with any nh equipment. any help would be great. | |
|