|
Traverse City MI | We lost all hydraulics on our 1086 last year. Pulled the pump and the drive gear was sheared off at the shaft. I replaced it with a new pump, but I cant seem to get much flow out of it. You have to wind the tractor up to get and action out of the remotes or 3pt arms. It will pick the planter up if its wound out. I pulled the screen on the signal line going to the pump and cleaned it and that didn't help. The flow control levers seem to have no affect on it either. Anybody have any other ideas? I have changed both filters already as well. | |
|
IH 86 series PFC hydraulic problem
