West Union, IOWA FLOLO Farm 52175 | has anybody shimmed the sway blocks on a 8x20 series tractor, I'm going to put the spray boom on tommorow. When I ran it on a 10series I had the 3pt shimmed pretty snug. This 20 has a good inch of gap,and the one from my 10 don't fit the 20(it's a 15000 # lift if that matters) and already has a block with spacer as shown in the pic and marked B...
What have others done? I think if I take the smaller one off and make a 1/2 inch plate to add on each side....should work?
TIA
 (swayblock.bmp)
Attachments
----------------
 swayblock.bmp (94KB - 122 downloads)
|
Deere 8x20 series sway blocks
