Viewing a forum - Precision Talk

Forums | Classifieds (107) | Skins | Language

You are logged in as a guest. ( logon | register )

Precision Talk
		Message format

Jump to page: < 1 2 3 4 5 6 7 8 9 ... > Forums List -> Precision Talk

Agleader clutches - leithy : 5/15/2019 19:39
- RE: Agleader clutches - AutosteerAaron : 5/15/2019 21:02
  - RE: Agleader clutches - tedbear : 5/16/2019 07:37
- RE: Agleader clutches - dri : 5/15/2019 21:27

A little help please - dri : 5/15/2019 19:08
- RE: A little help please - tedbear : 5/16/2019 07:52
  - RE: A little help please - dri : 5/16/2019 15:40

ez steer t2 error - co2shaun : 5/15/2019 18:35
- RE: ez steer t2 error - Mmaxed : 5/15/2019 19:40
  - RE: ez steer t2 error - ericlit : 5/16/2019 10:29
- RE: ez steer t2 error - Dev88t : 5/16/2019 10:42
- RE: ez steer t2 error - co2shaun : 5/16/2019 18:18

2630 Enable controls setting - blackader : 5/15/2019 10:31
- RE: 2630 Enable controls setting - flyboytoo : 5/15/2019 14:13
  - RE: 2630 Enable controls setting - blackader : 5/15/2019 17:00
- RE: 2630 Enable controls setting - greendream : 5/15/2019 18:07

Atu 200 turns off - farmerpete2400 : 5/15/2019 09:04
- RE: Atu 200 turns off - Tits351 : 5/15/2019 09:44
- RE: Atu 200 turns off - Super Ben : 5/15/2019 17:09

No radar detected on gen 3 20/20 - abaum565 : 5/15/2019 07:26
- RE: No radar detected on gen 3 20/20 - golfnut : 5/15/2019 07:30
  - RE: No radar detected on gen 3 20/20 - abaum565 : 5/15/2019 07:39
    - RE: No radar detected on gen 3 20/20 - tedbear : 5/16/2019 07:57
    - RE: No radar detected on gen 3 20/20 - steve1616 : 5/20/2019 19:16

Where to find Viper Pro Updates now? - agiron1702 : 5/15/2019 07:10
- RE: Where to find Viper Pro Updates now? - dgramenz : 5/15/2019 07:44
  - RE: Where to find Viper Pro Updates now? - agiron1702 : 5/15/2019 09:13

Terrastar-C subscription troubles - mr.agco : 5/14/2019 22:14
- RE: Terrastar-C subscription troubles - sunman : 5/15/2019 08:25
  - RE: Terrastar-C subscription troubles - mr.agco : 5/15/2019 09:08
    - RE: Terrastar-C subscription troubles - sunman : 5/15/2019 09:14

Trimble FMX Autopilot fault code 118 - MF4855 : 5/14/2019 21:27
- RE: Trimble FMX Autopilot fault code 118 - Josh7 : 5/15/2019 00:46
  - RE: Trimble FMX Autopilot fault code 118 - clausenm : 5/15/2019 11:15
- RE: Trimble FMX Autopilot fault code 118 - AutosteerAaron : 5/15/2019 07:50
- RE: Trimble FMX Autopilot fault code 118 - farmerjon52 : 5/15/2019 22:17
  - RE: Trimble FMX Autopilot fault code 118 - MF4855 : 5/16/2019 13:22

Gen 3 20/20 won't start - bigmoe : 5/14/2019 18:44
- RE: Gen 3 20/20 won't start - CentralWIGrain : 5/16/2019 10:01
  - RE: Gen 3 20/20 won't start - bigmoe : 5/19/2019 22:50
    - RE: Gen 3 20/20 won't start - CentralWIGrain : 5/22/2019 12:14
    - RE: Gen 3 20/20 won't start - CentralWIGrain : 5/22/2019 12:15

Section one and 2 alarm on in command 1200 - farmbetter : 5/14/2019 17:55
- RE: Section one and 2 alarm on in command 1200 - OettingAgService : 5/16/2019 17:33

Agleader clutch module troubles - Scott87 : 5/14/2019 16:39
- RE: Agleader clutch module troubles - tedbear : 5/14/2019 17:00
  - RE: Agleader clutch module troubles - Scott87 : 5/14/2019 18:05
- RE: Agleader clutch module troubles - jbweston : 5/14/2019 21:25
  - RE: Agleader clutch module troubles - tedbear : 5/14/2019 22:32
    - RE: Agleader clutch module troubles - Scott87 : 5/15/2019 16:43
- RE: Agleader clutch module troubles - Scott87 : 5/15/2019 07:40
  - RE: Agleader clutch module troubles - farmerwalt : 5/15/2019 10:40
- RE: Agleader clutch module troubles - Scott87 : 5/15/2019 22:20

Adding boom sections to 4730? - Central NY Farmer : 5/14/2019 15:08
- RE: Adding boom sections to 4730? - dgramenz : 5/14/2019 17:42
  - RE: Adding boom sections to 4730? - Central NY Farmer : 5/15/2019 08:53
    - RE: Adding boom sections to 4730? - dgramenz : 5/15/2019 09:18

2630 doesnt see 1770 planter - steveMIfarmer : 5/14/2019 14:35
- RE: 2630 doesnt see 1770 planter - gpsdude : 5/14/2019 14:49
- RE: 2630 doesnt see 1770 planter - EastOnfarmer : 5/15/2019 16:40
- RE: 2630 doesnt see 1770 planter - KevinM : 5/15/2019 20:04
- RE: 2630 doesnt see 1770 planter - superfordman : 5/16/2019 22:25

headsight - HSCOMBINE : 5/14/2019 12:56

Black hole on a farm - F150Mustang : 5/14/2019 11:29
- RE: Black hole on a farm - Red wrench : 5/14/2019 14:10
  - RE: Black hole on a farm - gpsdude : 5/14/2019 15:58
    - RE: Black hole on a farm - Farms With CASE : 5/17/2019 12:18
- RE: Black hole on a farm - litle80 : 5/15/2019 13:44
- RE: Black hole on a farm - Hosted : 5/15/2019 21:24
- RE: Black hole on a farm - brentnz : 5/16/2019 02:47
- RE: Black hole on a farm - johnny skeptical : 5/17/2019 13:05

JD Autotrac - Birddy : 5/14/2019 07:24
- RE: JD Autotrac - flyboytoo : 5/14/2019 16:34
- RE: JD Autotrac - Gophergetter : 5/18/2019 14:04

FM750 isn’t giving the planter monitor a speed reading - hinfarm : 5/13/2019 23:01
- RE: FM750 isn’t giving the planter monitor a speed reading - tedbear : 5/14/2019 06:19
  - RE: FM750 isn’t giving the planter monitor a speed reading - hinfarm : 5/14/2019 08:21
    - RE: FM750 isn’t giving the planter monitor a speed reading - Artic : 5/14/2019 12:49

digifarm issue - farmboy87 : 5/13/2019 22:24
- RE: digifarm issue - swenzel : 5/14/2019 06:12
  - RE: digifarm issue - farmboy87 : 5/14/2019 08:02
- RE: digifarm issue - caseihfarmer : 5/14/2019 13:52
  - RE: digifarm issue - caleb_brown : 5/16/2019 07:20
- RE: digifarm issue - Herbie56 : 5/14/2019 14:48
  - RE: digifarm issue - AVP_Matt : 5/14/2019 21:00

Ag leader Can A connection - dirtyd : 5/13/2019 21:25
- RE: Ag leader Can A connection - sunman : 5/14/2019 07:40
- RE: Ag leader Can A connection - KMech : 5/16/2019 06:51
  - RE: Ag leader Can A connection - premiertech : 5/21/2019 20:58
    - RE: Ag leader Can A connection - KMech : 5/22/2019 05:35

Where to mount globe on a rear steer - OHKen : 5/13/2019 20:40
- RE: Where to mount globe on a rear steer - Fingers77 : 5/13/2019 21:28
  - RE: Where to mount globe on a rear steer - Farms With CASE : 5/17/2019 13:10
- RE: Where to mount globe on a rear steer - Dryoung7 : 5/14/2019 04:59
- RE: Where to mount globe on a rear steer - OHKen : 5/14/2019 10:07

Intelliview 3 run JD 1990 drill? - Dekalb : 5/13/2019 19:38
- RE: Intelliview 3 run JD 1990 drill? - caseihfarmer : 5/14/2019 14:05

Section Control - Reese : 5/13/2019 19:10
- RE: Section Control - 4WD : 5/13/2019 22:26

Autofarm base station radio software update - No one : 5/13/2019 17:35

20/20 or ag leader - jk4555 : 5/13/2019 17:34
- RE: 20/20 or ag leader - smokesgasman : 5/13/2019 22:06
- RE: 20/20 or ag leader - farmerbroun : 5/14/2019 00:10
- RE: 20/20 or ag leader - KMech : 5/16/2019 07:01

Pro 700/ Kinze/ task controller. - magnum240cvt : 5/13/2019 17:17
- RE: Pro 700/ Kinze/ task controller. - torn : 5/13/2019 20:15
  - RE: Pro 700/ Kinze/ task controller. - magnum240cvt : 5/14/2019 00:32
    - RE: Pro 700/ Kinze/ task controller. - torn : 5/14/2019 07:58
- RE: Pro 700/ Kinze/ task controller. - KMech : 5/14/2019 07:33
- RE: Pro 700/ Kinze/ task controller. - Case986 : 5/14/2019 18:32

Ag Leader StripTill Module Controlling Electric Motor - tmattson : 5/13/2019 16:16
- RE: Ag Leader StripTill Module Controlling Electric Motor - tedbear : 5/13/2019 20:47
  - RE: Ag Leader StripTill Module Controlling Electric Motor - tmattson : 5/13/2019 22:32
    - RE: Ag Leader StripTill Module Controlling Electric Motor - MJS : 5/13/2019 23:34
      - RE: Ag Leader StripTill Module Controlling Electric Motor - tedbear : 5/14/2019 06:01

Do I need Firmware upgrade on FM-750 for WAAS. - redfarmer72 : 5/13/2019 16:07
- RE: Do I need Firmware upgrade on FM-750 for WAAS. - Mmaxed : 5/13/2019 20:53

Setting planting speed in 20/20 monitor - Streicher : 5/13/2019 13:29

20-20 Cab Control Module (CCM) - ironman : 5/13/2019 08:09
- RE: 20-20 Cab Control Module (CCM) - hoghunter : 5/14/2019 15:41

Fieldview and 2630 - Coastal : 5/13/2019 04:37
- RE: Fieldview and 2630 - fieldview : 5/13/2019 05:54
  - RE: Fieldview and 2630 - Coastal : 5/13/2019 08:28
    - RE: Fieldview and 2630 - Anderson Farms : 5/13/2019 10:05
  - RE: Fieldview and 2630 - fieldview : 5/13/2019 12:19
- RE: Fieldview and 2630 - Roscoe Draw : 5/14/2019 03:22

Grade control for surface leveling - SCIN Farmer : 5/12/2019 21:34
- RE: Grade control for surface leveling - thedodd : 5/13/2019 06:21
- RE: Grade control for surface leveling - Dogface1SG : 5/13/2019 07:12
  - RE: Grade control for surface leveling - SCIN Farmer : 5/13/2019 08:39
    - RE: Grade control for surface leveling - Dogface1SG : 5/13/2019 09:08
      - RE: Grade control for surface leveling - SCIN Farmer : 5/13/2019 11:03
        
        RE: Grade control for surface leveling - Dogface1SG : 5/13/2019 11:25
        
        RE: Grade control for surface leveling - SCIN Farmer : 5/13/2019 12:11
        
        RE: Grade control for surface leveling - TS79 : 5/13/2019 23:48
- RE: Grade control for surface leveling - gpsdude : 5/13/2019 11:46
- RE: Grade control for surface leveling - stevefilmer : 5/14/2019 18:54
- RE: Grade control for surface leveling - PrecisionJoe : 5/23/2019 19:09

Questions about NEMA message speeds - 4WD : 5/12/2019 17:36
- RE: Questions about NEMA message speeds - GPS85 : 5/12/2019 17:40
  - RE: Questions about NEMA message speeds - 4WD : 5/12/2019 17:49
    - RE: Questions about NEMA message speeds - fastxcr : 5/12/2019 20:15
- RE: Questions about NEMA message speeds - caseihfarmer : 5/13/2019 06:49
- RE: Questions about NEMA message speeds - KMech : 5/13/2019 10:18
  - RE: Questions about NEMA message speeds - 4WD : 5/13/2019 10:36
    - RE: Questions about NEMA message speeds - KMech : 5/16/2019 07:03
      - RE: Questions about NEMA message speeds - 4WD : 5/16/2019 07:19

Thanks to mx270a (Lance) for his old 2010 you-tube video - 4WD : 5/12/2019 17:28
- RE: Thanks to mx270a (Lance) for his old 2010 you-tube video - mx270a : 5/13/2019 08:09

greenstar rate controler 2630 stuck in limp home mode - ndcorngrower : 5/12/2019 10:41
- RE: greenstar rate controler 2630 stuck in limp home mode - UNL84 : 5/12/2019 16:02

Trimble CIH MX issue. - Niklass : 5/12/2019 09:27
- RE: Trimble CIH MX issue. - Fingers77 : 5/12/2019 09:34
  - RE: Trimble CIH MX issue. - Niklass : 5/12/2019 18:05

Viper 4 A-B lines - nixabuki : 5/11/2019 22:54
- RE: Viper 4 A-B lines - mit9750 : 5/12/2019 00:04
  - RE: Viper 4 A-B lines - nixabuki : 5/12/2019 10:14
    - RE: Viper 4 A-B lines - Amc4life : 5/13/2019 08:50
      - RE: Viper 4 A-B lines - dgramenz : 5/13/2019 14:43
        
        RE: Viper 4 A-B lines - nixabuki : 5/13/2019 21:51
  - RE: Viper 4 A-B lines - nebfarmer : 5/12/2019 10:57
    - RE: Viper 4 A-B lines - nixabuki : 5/12/2019 11:17
- RE: Viper 4 A-B lines - dgramenz : 5/13/2019 07:06

Agleader controlling half-width disconnects? - Sharecropper jr. : 5/11/2019 22:48
- RE: Agleader controlling half-width disconnects? - KMech : 5/12/2019 07:27
- RE: Agleader controlling half-width disconnects? - tedbear : 5/12/2019 07:38
  - RE: Agleader controlling half-width disconnects? - KMech : 5/12/2019 08:13
    - RE: Agleader controlling half-width disconnects? - tedbear : 5/12/2019 09:16
- RE: Agleader controlling half-width disconnects? - Sharecropper jr. : 5/12/2019 10:03

John Deere 4640 display - dfuller : 5/11/2019 20:09
- RE: John Deere 4640 display - mit9750 : 5/11/2019 21:36
- RE: John Deere 4640 display - tlarson4430 : 5/11/2019 22:07
- RE: John Deere 4640 display - superfordman : 5/12/2019 01:04

Autopilot in 946 Versatile - farminsmall : 5/11/2019 19:20
- RE: Autopilot in 946 Versatile - WTW : 5/11/2019 20:59
  - RE: Autopilot in 946 Versatile - farminsmall : 5/11/2019 22:15
- RE: Autopilot in 946 Versatile - Trimble Man : 5/12/2019 03:45

tedbear-got it! - runningbehind : 5/11/2019 19:17
- RE: tedbear-got it! - tedbear : 5/13/2019 05:43

Deere machine sync won’t join network - dewgubbe : 5/11/2019 18:52
- RE: Deere machine sync won’t join network - Gordon : 5/11/2019 20:51
  - RE: Deere machine sync won’t join network - dewgubbe : 5/12/2019 15:27

Power source for GPS dome with 20/20 and/or Integra - GrainTrader : 5/11/2019 14:11
- RE: Power source for GPS dome with 20/20 and/or Integra - Elmbar : 5/11/2019 18:18
- RE: Power source for GPS dome with 20/20 and/or Integra - tlarson4430 : 5/11/2019 22:23

question for Ag Leader GeoSteer guru's - smallsquares : 5/11/2019 12:07
- RE: question for Ag Leader GeoSteer guru's - swenzel : 5/11/2019 14:00
- RE: question for Ag Leader GeoSteer guru's - caseihfarmer : 5/11/2019 16:41
- thanks for the replies, issue resolved - smallsquares : 5/11/2019 21:00

What does 200% CMR mean on a SNB900 radio? - sand85 : 5/11/2019 09:30

9510 with Yeild Moniter, what do I need to add for mapping? - gbryce : 5/11/2019 08:48

External GPS into Outback s2 - Tervis29 : 5/11/2019 08:06

Omnistar - agcostar : 5/11/2019 07:34
- RE: Omnistar - ctnfarms : 5/11/2019 21:49
  - RE: Omnistar - agcostar : 5/11/2019 23:23
- RE: Omnistar - nebfarmer : 5/12/2019 11:02
- RE: Omnistar - Dave F : 5/12/2019 15:49

a couple of questions on radar plug pinout - dairyman3 : 5/11/2019 07:18
- RE: a couple of questions on radar plug pinout - tedbear : 5/12/2019 08:02
  - RE: a couple of questions on radar plug pinout - dairyman3 : 5/13/2019 14:32
    - RE: a couple of questions on radar plug pinout - tedbear : 5/14/2019 06:06

Case IH Guidance - Red Driver : 5/10/2019 22:56
- RE: Case IH Guidance - dgramenz : 5/11/2019 06:50
  - RE: Case IH Guidance - raider2b : 5/11/2019 07:06
    - RE: Case IH Guidance - Red Driver : 5/11/2019 09:06
      - RE: Case IH Guidance - CASE3594 : 5/11/2019 17:46
        
        RE: Case IH Guidance - Red Driver : 5/11/2019 18:11
- RE: Case IH Guidance - RedTractorGuy117 : 5/11/2019 08:28
- RE: Case IH Guidance - coop : 5/11/2019 18:37

Jump to page: < 1 2 3 4 5 6 7 8 9 ... > Forums List -> Precision Talk
(Search this forum)

(Delete all cookies set by this site)