Viewing a forum - Precision Talk

Forums | Classifieds (24) | Skins | Language

You are logged in as a guest. ( logon | register )

Precision Talk
		Message format

Jump to page: < 614 615 616 617 618 619 ... 620 621 622 623 624 625 626 ... > Forums List -> Precision Talk

2630 background maps - 9670guy : 10/27/2013 08:02
- Re: 2630 background maps - 4wdaaron : 10/27/2013 11:51

Apex - Move Data Based Upon Date/Time - ksmith : 10/27/2013 08:02
- Re: Apex - Move Data Based Upon Date/Time - 4wdaaron : 10/27/2013 11:53
- Re: Apex - Move Data Based Upon Date/Time - slawrence : 10/29/2013 06:06

Section Control on AL Insight - 641cfrank : 10/26/2013 21:50
- RE: Section Control on AL Insight - tedbear : 10/27/2013 08:10
- Re: Section Control on AL Insight - 641cfrank : 10/27/2013 14:10
  - Re: Section Control on AL Insight - tedbear : 10/28/2013 06:17

Implement width - Micksburg : 10/26/2013 20:39
- Re: Implement width - fox128 : 10/26/2013 21:28
- Re: Implement width - iowasparrow : 10/26/2013 21:33
- Re: Implement width - WildBuckwheat : 10/27/2013 09:26
- RE: Implement width - tedbear : 10/27/2013 13:16
- Re: Implement width - eliass : 10/27/2013 21:29
- RE: Implement width - tedbear : 10/28/2013 06:25
- Re: Implement width - Micksburg : 10/31/2013 12:47

2600 mapping - dg25 : 10/26/2013 14:34
- RE: 2600 mapping - bmatteson : 10/26/2013 20:48
- Re: 2600 mapping - slawrence : 10/29/2013 06:10
- Re: 2600 mapping - PrecisionNE : 10/29/2013 09:04

Deleting guidance lines out of a 2600 - Schlick55 : 10/26/2013 10:28
- Re: Deleting guidance lines out of a 2600 - Schlick55 : 10/26/2013 10:50

Ez Pilot cable Relay or Module? - AgrotronicBrazil : 10/26/2013 07:43
- Re: Ez Pilot cable Relay or Module? - gpsdude : 10/26/2013 12:17
  - Re: Ez Pilot cable Relay or Module? - Billyfox : 10/26/2013 12:48
- Re: Ez Pilot cable Relay or Module? - Trimble Man : 10/27/2013 03:58

Trimble FMX - olf20 : 10/26/2013 06:55
- Re: Trimble FMX - hawkeye76 : 10/26/2013 07:09
  - Re: Trimble FMX - olf20 : 10/26/2013 20:55
- RE: Trimble FMX - J. Sheehan : 10/26/2013 08:56
- RE: Trimble FMX - Jay in WA : 10/26/2013 11:01
- Re: Trimble FMX - Fingers77 : 10/26/2013 12:01
- Re: Trimble FMX - torn : 10/27/2013 08:09
- Re: Trimble FMX - Fingers77 : 10/27/2013 08:43
- RE: Trimble FMX vs pro 700??? - Oregon Farmer : 10/27/2013 23:20
  - RE: Trimble FMX vs pro 700??? - Bleed CIH Red : 10/28/2013 15:30
    - RE: Trimble FMX vs pro 700??? - olf20 : 10/29/2013 06:08
      - Re: Trimble FMX - torn : 10/29/2013 09:14
        
        Re: Trimble FMX - Istumped : 10/30/2013 19:06

Deere YM question? - farmcorn : 10/26/2013 06:23
- Re: Deere YM question? - 4wdaaron : 10/27/2013 11:56

CFX 750 replaced to TMX 2050 - AgrotronicBrazil : 10/26/2013 06:19
- Re: CFX 750 replaced to TMX 2050 - atwfarm16 : 10/26/2013 08:23
  - Re: CFX 750 replaced to TMX 2050 - arcticcatfarmer : 10/26/2013 10:51
    - Re: CFX 750 replaced to TMX 2050 - torn : 10/26/2013 13:01
      - Re: CFX 750 replaced to TMX 2050 - Canucker : 10/28/2013 11:14
        
        Re: CFX 750 replaced to TMX 2050 - torn : 10/28/2013 11:53
        
        Re: CFX 750 replaced to TMX 2050 - Canucker : 12/5/2013 22:50

Torn, a couple questions - bigmoe : 10/25/2013 21:51
- Re: Torn, a couple questions - torn : 10/26/2013 05:29
  - Re: Torn, a couple questions - bigmoe : 10/26/2013 09:30
    - Re: Torn, a couple questions - torn : 10/27/2013 14:37

Montag striptill ran with Viper pro - catpowr22 : 10/25/2013 21:22
- Re: Montag striptill ran with Viper pro - cdeklotz : 10/25/2013 21:50

Yield mapping CR 960 - trent_west_aust : 10/25/2013 20:54
- Re: Yield mapping CR 960 - torn : 10/25/2013 21:33
  - Re: Yield mapping CR 960 - trent_west_aust : 10/25/2013 23:02
- Re: Yield mapping CR 960 - trent_west_aust : 10/25/2013 23:08
  - Re: Yield mapping CR 960 - torn : 10/26/2013 05:25
    - Re: Yield mapping CR 960 - trent_west_aust : 10/26/2013 05:30
      - Re: Yield mapping CR 960 - torn : 10/26/2013 13:02
  - Re: Yield mapping CR 960 - coles : 10/26/2013 05:28

Yield not same on Integra as CEBIS on Lexion - Maple Leaf : 10/25/2013 20:42
- RE: Yield not same on Integra as CEBIS on Lexion - bleedred : 10/26/2013 08:45
  - Re: Yield not same on Integra as CEBIS on Lexion - Maple Leaf : 10/26/2013 10:01
    - Re: Yield not same on Integra as CEBIS on Lexion - Twister : 10/26/2013 11:29
      - Re: Yield not same on Integra as CEBIS on Lexion - Maple Leaf : 10/26/2013 16:49
        
        Re: Yield not same on Integra as CEBIS on Lexion - panotiller : 10/27/2013 20:18
- Re: Yield not same on Integra as CEBIS on Lexion - magnumman : 10/28/2013 09:29
  - Re: Yield not same on Integra as CEBIS on Lexion - FarmWeather : 10/28/2013 09:36
    - Re: Yield not same on Integra as CEBIS on Lexion - Maple Leaf : 10/29/2013 19:44
- Re: Yield not same on Integra as CEBIS on Lexion - FarmWeather : 10/29/2013 20:35
  - Re: Yield not same on Integra as CEBIS on Lexion - Maple Leaf : 10/30/2013 06:23

Pro 600 autosteer won't engage -- no gps heading warning - Jmark71 : 10/25/2013 20:39
- Re: Pro 600 autosteer won't engage -- no gps heading warning - torn : 10/25/2013 20:43
  - Re: Pro 600 autosteer won't engage -- no gps heading warning - Jmark71 : 10/25/2013 20:47

Case IH 7120 combine - mbagronomy : 10/25/2013 20:08
- Re: Case IH 7120 combine - torn : 10/25/2013 20:32
  - Re: Case IH 7120 combine - daves : 10/29/2013 09:49
    - Re: Case IH 7120 combine - torn : 10/29/2013 15:59

Grain testers - erin051901 : 10/25/2013 19:15
- Re: Grain testers - Istumped : 10/25/2013 19:24
- Re: Grain testers - bigmoe : 10/26/2013 04:45
- Re: Grain testers - averagejoe : 10/27/2013 08:40

Cost for Trimble RTK - billybob77 : 10/25/2013 18:36
- Re: Cost for Trimble RTK - Badger : 10/25/2013 18:54
  - Re: Cost for Trimble RTK - dgrimmius : 10/25/2013 20:20
- Re: Cost for Trimble RTK - dgrimmius : 10/25/2013 19:28
  - Re: Cost for Trimble RTK - billybob77 : 10/25/2013 19:43
- Re: Cost for Trimble RTK - HowieMcG : 10/28/2013 09:38
  - Re: Cost for Trimble RTK - Canucker : 10/28/2013 11:22
    - Re: Cost for Trimble RTK - WTW : 10/28/2013 19:20
  - Re: Cost for Trimble RTK - gpsdude : 10/28/2013 14:28
    - Re: Cost for Trimble RTK - HowieMcG : 10/30/2013 09:27
      - Re: Cost for Trimble RTK - gpsdude : 10/30/2013 13:21

Greenstar II , remove field borders - 99guy : 10/25/2013 18:33
- Re: Greenstar II , remove field borders - 690KSU : 10/25/2013 21:10
- Re: Greenstar II , remove field borders - Glenn Dye : 10/25/2013 21:30
  - great ............ thanks nt - 99guy : 10/26/2013 06:18

JD 2600 and StarFire iTC questions - 2greentractors : 10/25/2013 14:15
- Re: JD 2600 and StarFire iTC questions - 4wdaaron : 10/25/2013 18:15

Pro600 Corn! status symbol. - mvisto : 10/25/2013 13:50
- Re: Pro600 Corn! status symbol. - PFS12 : 10/25/2013 14:04
  - Re: Pro600 Corn! status symbol. - torn : 10/25/2013 17:11
    - Re: Pro600 Corn! status symbol. - mvisto : 10/25/2013 19:38

GPS app for iPad? - cyfarmer13 : 10/25/2013 11:27
- Re: GPS app for iPad? - AVP_Matt : 10/25/2013 12:16
  - Re: GPS app for iPad? - cyfarmer13 : 10/25/2013 12:18
  - Re: GPS app for iPad? - cyfarmer13 : 10/25/2013 13:29
    - Re: GPS app for iPad? - AVP_Matt : 10/25/2013 13:49

Y-Drop - pfgps : 10/25/2013 09:40

Steering SP sawthers ... Trimble - Badger : 10/25/2013 07:24
- RE: Steering SP sawthers ... Trimble - J. Sheehan : 10/25/2013 09:45
- Re: Steering SP sawthers ... Trimble - Hank, in Or : 10/25/2013 11:33

Auto Steer not always engaging - tedbear : 10/25/2013 06:43
- Re: Auto Steer not always engaging - cyfarmer13 : 10/25/2013 11:37
  - Re: Auto Steer not always engaging - lvia : 10/25/2013 13:23
- RE: Auto Steer not always engaging - Wombat27 : 10/26/2013 04:58
  - RE: Auto Steer not always engaging - tedbear : 10/26/2013 07:04

FM1000 - Titan123 : 10/24/2013 17:42
- Re: FM1000 - Fingers77 : 10/24/2013 21:24

SST Stratus on Trimble Nomad - agview_precision : 10/24/2013 15:44
- Re: SST Stratus on Trimble Nomad - dgramenz : 10/24/2013 19:40
  - Re: SST Stratus on Trimble Nomad - kswrenchturner05 : 10/31/2013 08:27

Adding fence row nozzle to field iq - mdnelson86 : 10/24/2013 15:14
- RE: Adding fence row nozzle to field iq - Trimbleguy : 10/24/2013 16:53
- Re: Adding fence row nozzle to field iq - mdnelson86 : 10/24/2013 17:18
  - Re: Adding fence row nozzle to field iq - Trimbleguy : 10/24/2013 17:39
    - Re: Adding fence row nozzle to field iq - Trimble Man : 10/25/2013 04:12
- Re: Adding fence row nozzle to field iq - mdnelson86 : 10/24/2013 17:58
  - Re: Adding fence row nozzle to field iq - Trimbleguy : 10/25/2013 00:45
    - Re: Adding fence row nozzle to field iq - mdnelson86 : 3/6/2014 16:46

Pro 600/ 262 RTK - Roger Cochran : 10/24/2013 11:32
- RE: Pro 600/ 262 RTK - Roger Cochran : 10/24/2013 11:53
- Re: Pro 600/ 262 RTK - raider2b : 10/24/2013 13:21
  - Re: Pro 600/ 262 RTK - johnny skeptical : 10/25/2013 07:28
- Re: Pro 600/ 262 RTK - dgrimmius : 10/24/2013 16:04
- Re: Pro 600/ 262 RTK - Canucker : 10/25/2013 11:29
- Re: Pro 600/ 262 RTK - HowieMcG : 10/28/2013 09:40

Pro 700 video input - Hammer7 : 10/24/2013 11:07
- Re: Pro 700 video input - torn : 10/24/2013 11:19
  - Re: Pro 700 video input - Hammer7 : 10/24/2013 11:37
    - Re: Pro 700 video input - torn : 10/24/2013 11:45
  - Re: Pro 700 video input - caseih9280 : 10/24/2013 22:48
- Re: Pro 700 video input - Hammer7 : 10/24/2013 11:50

Distance Cal on S680 - JHAurora : 10/24/2013 08:41
- Re: Distance Cal on S680 - 4wdaaron : 10/24/2013 20:02
  - Re: Distance Cal on S680 - JHAurora : 10/25/2013 06:39
- Re: Distance Cal on S680 - SWMN-JD : 10/24/2013 20:49

Vertical Accuracy at speed - coles : 10/24/2013 07:47
- Re: Vertical Accuracy at speed - vailcat : 10/24/2013 07:52
- Re: Vertical Accuracy at speed - Knucklehead : 10/24/2013 08:12
  - Re: Vertical Accuracy at speed - coles : 10/24/2013 09:08
    - Re: Vertical Accuracy at speed - lvia : 10/24/2013 09:37
      - Re: Vertical Accuracy at speed - coles : 10/24/2013 18:39
        
        Re: Vertical Accuracy at speed - bleedred : 10/24/2013 18:58
        
        Re: Vertical Accuracy at speed - gpsdude : 10/24/2013 22:56
- RE: Vertical Accuracy at speed - daveb : 10/25/2013 08:04

Accuguide in 2388, how do I keep it from auto engaging? - cotton880 : 10/23/2013 21:27
- Re: Accuguide in 2388, how do I keep it from auto engaging? - torn : 10/23/2013 22:03
- RE: Accuguide in 2388, how do I keep it from auto engaging? - Pigclone : 10/24/2013 07:00
  - RE: Accuguide in 2388, how do I keep it from auto engaging? - cotton880 : 10/24/2013 08:35
    - I was wrong version 26.3 on display and auto steer - cotton880 : 10/24/2013 09:54
    - Re: Accuguide in 2388, how do I keep it from auto engaging? - torn : 10/24/2013 12:18
      - Re: Accuguide in 2388, how do I keep it from auto engaging? - cotton880 : 10/24/2013 20:14
        
        Re: Accuguide in 2388, how do I keep it from auto engaging? - torn : 10/24/2013 22:11

Pro600 Yield Monitor Problem! - tci184 : 10/23/2013 21:05
- Re: Pro600 Yield Monitor Problem! - torn : 10/23/2013 22:01
  - Re: Pro600 Yield Monitor Problem! - thisisafrica : 10/27/2013 15:06

Trimble yield monitor header height sensor? - WTW : 10/23/2013 18:54
- Re: Trimble yield monitor header height sensor? - nar : 10/23/2013 21:46
  - Re: Trimble yield monitor header height sensor? - WTW : 10/24/2013 00:25
    - Re: Trimble yield monitor header height sensor? - trmbldealer : 10/24/2013 08:47
      - Re: Trimble yield monitor header height sensor? - WTW : 10/24/2013 11:19
- Re: Trimble yield monitor header height sensor? - CornfedHusker : 10/24/2013 11:16
  - Re: Trimble yield monitor header height sensor? - WTW : 10/24/2013 11:22
    - Re: Trimble yield monitor header height sensor? - torn : 10/24/2013 11:47
      - Re: Trimble yield monitor header height sensor? - PreciselyCase : 10/30/2013 13:33

EZ Guide 250 ? - PeaKing : 10/23/2013 15:51
- RE: EZ Guide 250 ? - WI Jeff : 10/23/2013 16:01
  - Re: EZ Guide 250 ? - PeaKing : 10/23/2013 16:03
    - Re: EZ Guide 250 ? - Canucker : 10/23/2013 16:25
- Re: EZ Guide 250 ? - iafarmerken : 10/23/2013 17:55
  - Re: EZ Guide 250 ? - Patriot08 : 10/23/2013 21:04

Intelliview III firmware? - abaum565 : 10/23/2013 14:49
- Re: Intelliview III firmware? - Canucker : 10/23/2013 16:27
- Re: Intelliview III firmware? - AFS kyle : 10/23/2013 17:26
- RE: Intelliview III firmware? - Patriot08 : 10/23/2013 21:09
- Re: Intelliview III firmware? - iowasparrow : 10/23/2013 21:11
  - Re: Intelliview III firmware? - Canucker : 10/25/2013 11:31
    - Re: Intelliview III firmware? - sricks : 10/25/2013 14:27

Deere sprayer controller/ display issue - bell588 : 10/23/2013 14:09
- Re: Deere sprayer controller/ display issue - 690KSU : 10/23/2013 15:59
  - Re: Deere sprayer controller/ display issue - bell588 : 10/24/2013 06:44
    - Re: Deere sprayer controller/ display issue - Lil' Hoss : 10/24/2013 07:17
      - Re: Deere sprayer controller/ display issue - bell588 : 10/24/2013 10:19
- Re: Deere sprayer controller/ display issue - 690KSU : 10/24/2013 11:09

How to make JD display drive boundaries - blyth12 : 10/23/2013 10:56
- Re: How to make JD display drive boundaries - mit9750 : 10/23/2013 11:28
  - Re: How to make JD display drive boundaries - mit9750 : 10/23/2013 11:30
- Re: How to make JD display drive boundaries - mit9750 : 10/23/2013 11:31

Case OEM Yield monitor calibration - isucyclone : 10/23/2013 08:22
- Re: Case OEM Yield monitor calibration - torn : 10/23/2013 08:32
  - Re: Case OEM Yield monitor calibration - isucyclone : 10/23/2013 08:38
    - Re: Case OEM Yield monitor calibration - torn : 10/23/2013 08:57
      - Re: Case OEM Yield monitor calibration - isucyclone : 10/23/2013 09:08
- Re: Case OEM Yield monitor calibration - isucyclone : 10/23/2013 09:15
  - Re: Case OEM Yield monitor calibration - torn : 10/23/2013 09:53

EZ guide 500 problems - AlphaOutlaw : 10/23/2013 07:38
- Re: EZ guide 500 problems - Canucker : 10/23/2013 09:05
  - Re: EZ guide 500 problems - AlphaOutlaw : 10/23/2013 09:46
- Re: EZ guide 500 problems - cbellhouse : 10/23/2013 14:32
- Re: EZ guide 500 problems - Patriot08 : 10/23/2013 21:21
  - Re: EZ guide 500 problems - AlphaOutlaw : 10/26/2013 15:39
    - Re: EZ guide 500 problems - derby323 : 10/26/2013 18:59
      - Re: EZ guide 500 problems - AlphaOutlaw : 10/27/2013 11:43
        
        Re: EZ guide 500 problems - thisisafrica : 10/27/2013 15:15

2630 load totals - nck79 : 10/23/2013 07:15
- Re: 2630 load totals - 4wdaaron : 10/23/2013 11:12
  - Re: 2630 load totals - mit9750 : 10/23/2013 11:23
  - Re: 2630 load totals - nck79 : 10/23/2013 16:19
  - Re: 2630 load totals - mit9750 : 10/23/2013 23:12
    - Re: 2630 load totals - nck79 : 10/24/2013 06:02
      - it should - LIMS : 10/27/2013 22:07
      - Re: 2630 load totals - amjchf : 10/8/2023 13:54
- Re: 2630 load totals - 4wdaaron : 10/24/2013 20:03

SMS yield map adjustment - ioway : 10/22/2013 22:08
- Re: SMS yield map adjustment - cyclones30 : 10/23/2013 08:26
  - Re: SMS yield map adjustment - mtbrights : 10/23/2013 09:41
    - Re: SMS yield map adjustment - JHAurora : 10/23/2013 13:25

Contour master sensor issue - farmhelper : 10/22/2013 21:51

Guidance Help - justbad7 : 10/22/2013 21:31
- Re: Guidance Help - iowasparrow : 10/22/2013 22:34
  - Re: Guidance Help - justbad7 : 10/23/2013 13:50
    - Re: Guidance Help - pfgps : 10/23/2013 20:33
      - Re: Guidance Help - Patriot08 : 10/23/2013 21:28

Atu on lexion - Campbell Farms : 10/22/2013 21:23

9120 combine hydrostat problem, software glitch? - chedv : 10/22/2013 18:15
- Re: 9120 combine hydrostat problem, software glitch? - bnobles : 10/22/2013 21:10
- RE: 9120 combine hydrostat problem, software glitch? - mx270a : 10/22/2013 21:22
  - Re: 9120 combine hydrostat problem, software glitch? - torn : 10/22/2013 21:42
- Re: 9120 combine hydrostat problem, software glitch? - midwest : 10/22/2013 22:40
- RE: 9120 combine hydrostat problem, software glitch? - chedv : 10/23/2013 06:26
  - RE: 9120 combine hydrostat problem, software glitch? - johnny skeptical : 10/23/2013 07:01
  - Re: 9120 combine hydrostat problem, software glitch? - bnobles : 10/23/2013 11:39
  - Re: 9120 combine hydrostat problem, software glitch? - bnobles : 10/24/2013 15:12

install program on Viper II - coopchris : 10/22/2013 15:58

Pro 600 & 6088 combine speed accuracy issue - Brandon : 10/22/2013 15:48
- Re: Pro 600 & 6088 combine speed accuracy issue - torn : 10/22/2013 16:39
- Re: Pro 600 & 6088 combine speed accuracy issue - CaseFarmer : 10/22/2013 20:02

PRO 600 won't maintain yield cal accuracy - ioway : 10/22/2013 15:12
- Re: PRO 600 won't maintain yield cal accuracy - torn : 10/22/2013 16:40
- RE: PRO 600 won't maintain yield cal accuracy - ioway : 10/22/2013 17:57
  - Re: PRO 600 won't maintain yield cal accuracy - torn : 10/22/2013 18:43
    - Re: PRO 600 won't maintain yield cal accuracy - ioway : 10/22/2013 18:46
      - Re: PRO 600 won't maintain yield cal accuracy - torn : 10/22/2013 20:54
        
        Re: PRO 600 won't maintain yield cal accuracy - ioway : 10/22/2013 21:26
        
        Re: PRO 600 won't maintain yield cal accuracy - torn : 10/22/2013 21:40
        
        Re: PRO 600 won't maintain yield cal accuracy - ioway : 10/22/2013 21:56
- RE: PRO 600 won't maintain yield cal accuracy - johnny skeptical : 10/25/2013 07:40

Jump to page: < 614 615 616 617 618 619 ... 620 621 622 623 624 625 626 ... > Forums List -> Precision Talk
(Search this forum)

(Delete cookies)