|
|
Findlay, Ohio | Was wondering if anybody has put a GSI Top Dry up in the last 3 or 4 years? What size and how do you like it, do the published capacities seem to be right? |
|
| |
|
The middle of Maryland's Eastern Shore | We put one up this year. Started it last week. So far we are impressed. Had several start up problems. Several bad motors and a couple wiring problems from factory. Our dealer was here to start it and took care of the problems. So far would recommend but make sure you deal with some that has sold and serviced top dries. |
|
| |
|
Ripley, Ontario Canada | Help a neighbor that bought an older used top dry. It had not run for a while, and we have had enough burner/controller issues. Big problem is no dealer close by. Unit works ok when it works, but service has been frustrating get all geared up to go and then wait a day or two for service. Also have had issues getting a consistent sample when drying 30+% corn, not enough mixing, should really dry it twice with a dump in between but not set up for that.
Over all, system is simple but we don't have close enough dealer support here, so I wouldn't buy one here. |
|
| |
|
Eastern Ont | Put up a used STOREMORE one 2 years ago Moved it 40 miles
Really impressed with it . 24ft, 250 ton bin 1000 bushel dryer
We find it simple to use check the moisture, check the charts, set the timer and walk away
John Why are you trying to dry 30%corn most dryers have problems with that anytime not just the topdry
What are your burner /controller issues?????
The GSI topdry are the same system
|
|
| |
GSI Top Dry.
