Posted 10/24/2026 19:51 (#11785466 - in reply to #11785400) Subject: RE: Is it hard on 1066 hydraulic pump to leave on high psi consantly?
North Central OH
Above replies are correct but even with an open center valve it is still a load on the system. When we had an hydraulic mover on an auger with a 686 on it you could hear a tone difference in the engine after you cut the valve off. 1066 may not care as much but a little wasted power either way.
Is it hard on 1066 hydraulic pump to leave on high psi consantly?
