|
Faunsdale, AL | Does your combine have a table of which coils must magnetize to do each hydraulic function that’s silk screened on the inside of the left side door near hydraulic valve stack?
On the older models, two coils must be magnetized to do anything requiring pressure. Which ones and their position on the valve stack are shown on the table inside left full wing door. There’s a valve coil that is used for both header lift and auger swing. If it’s bad it’ll stop everything that requires pressure. Of course an
Electrical problem would do the same if you were just testing which coils get magnetized when you hit the button. Have to check resistance through coils and compare with others. | |
|
9660 feeder house will not raise
