|
Faunsdale, AL | Be ready with your towels. Tank is above all the joints you’ll be taking loose. It will come from hydrostat pump end and tank end as well as draining out of cooler when you take those ends loose.
May be able to take connections loose at tank and pump and drain or purge lines and cooler with air into a container to reduce the mess inside the rotating screen. As I remember it was tight getting the lines around the corner and through the sheet metal opening to come back into the cooler enclosure and hook up.
Deere didn’t see fit to put a shutoff valve at tank outlet or make it possible to clean strainer inside tank.
Edited by ccjersey 8/20/2026 11:48
| |
|
Changing Oil cooler lines 9600 combine
