Southern PA | 3500ctd - 8/19/2026 23:11
Does the auger swing out? We had an issue with the feederhouse not raising and the auger wouldn't move. Ended up being a bad control board. Bad control boards seem to be fairly common with these machines.
This ^^^^^^^^^. If the auger doesn't swing out, header doesn't raise, and you've checked the hydraulic reservoir, etc., it's probably a control board. They can take a permanent vacation while the machine is sitting over winter, we've seen that before with the 9660 we had. Happened twice to us. |
9660 feeder house will not raise
