Posted 8/19/2026 17:15 (#11732520 - in reply to #11732435) Subject: RE: Pics of JD4440 SCV low pressure/motor return port
SW MN
Just take one of the side plugs out of the scv, I always do one on the side away from 3pt arm, it's 3/4 oring, put in a 90 degree 3/4 oring male male and screw pioneer coupler to it. I always cut about two threads off of the fitting so when screwing it into the scv housing it won't contact the control lever inside. Have done many this way.
Pics of JD4440 SCV low pressure/motor return port
