|
NE Indiana | Our auger will creep out very slowly. Ive seen it out as far as a 3-4 feet before whoever is running it catches it and swings it back in, so guessing it would just continue to creep out if you let it. Going down the road you have to hit the in button about every minute. Is there a common problem to check? I pulled the 2 solenoid cartridges out that I think go to the in/out and the orings looked fine. There are 5 solenoids on that valve block I pulled the two that were on the outside directly below the lines going into the block marked augin and augout
I read something about the nut coming loose on the piston inside the cylinder, but it seemed like that problem was the auger wasn't going all the way in, not creeping out. | |
|
S780 Auger creeps out while driving.
