|
custar ohio | I should have added that was my response and we lowered them halfway and it still happened. Lowered them all the way and no difference.
The AF "expert" says they should be wide open and is thoroughly stumped.
The tech who came to the field, ran the unload for an hour in the morning to eliminate the question of shined up surfaces. No change.
I should add that they say "have never heard of this before, you are the first".
I call total BS on this as these are brand new identical machines.
Has to be someone out there in wheat country who has been through this. | |
|
AF9 unload issue
