|
Auxvasse, Mo | I have a 2014 case 1255 planter ran off a pro700 and all tractor hydraulics. Only the left side vac fan will come on. The right side has pressure up to this valve block. I have power to the solenoid on the block, and have swapped solenoids with the one I know is working on the left side. I’ve cleaned connections at the plug and where solenoid contacts the valve, but still can’t get it to come on. I’m looking for any suggestions to try before I buy a new $1200 flow control valve.
Edited by samshryock 3/27/2026 06:00
 (IMG_4892 (full).jpeg)
Attachments
----------------
 IMG_4892 (full).jpeg (146KB - 2 downloads)
| |
|
Case IH 1255 Vacuum Fan
