|
| Yes, you can absolutely integrate the scale into ISOBUS. There is a terminator connector on the seedstar harness of a JD1990. That terminator connection allows you to both power the scale display and connect the ISO CAN to the planter, which will show up on your virtual terminal (2630, 4600, or GEN5).
The Scale-Tec POINT is ISOBUS compatible, in addition to having Bluetooth and it being a display. A big value is mounting the POINT at the back of your drill so you can see the weight when loading the drill, and see the weight inside the cab via ISOBUS when running through the field. | |
|
Intellidrive 1990 Deere drill
