|
Nebraska | Yeah, I bought a TC unlock for it yesterday. And I thought it would solve my problems.
Turns out its not as bad as I thought. I figured something out this morning... I drilled around my house with this tractor a few days ago and during the operation the tractor sat for a bit while I did something, when I came back and restarted the operation a glitch of some kind happened and it painted some kind of persistent coverage that somehow got written into my "Field" file. It showed up as stripes and blocks like half my drill width. It was weird. And it just so happens the stripes and blocks were across my yard where I was trying to test it. And it wouldn't restart or run the spreader while it was in that area.
I just went out and tested it in the field driving into and out of those stripes and blocks and sure enough... it was turning off/on. So I deleted the field and transferred a clean copy from my USB and they are gone.
So I thought I couldn't turn it on/off with the boom button, but in fact I can.... as long as the file is clean.
Now it works good and as I expected. I still have to go into the Teejet UI to start it for a field, but can turn it on/off with the
"master switch" button. Whew! What a relief!
So it wasn't an ISOBUS problem, it was a field file problem. I was baffled why it wouldn't turn on/off with the master switch.
So one question.... Are you able to get your rate or total lbs applied in any of your INFO Status slideouts? I don't have any options for having things like Spinner Speed or Application totals any data like that. Didn't know if I could run another plug-in to be able to get that.
And the variable rate and section control works too. So maybe this will actually work without modification. I can live with not having the application data while I'm doing it on my display, as long as its written into the field data that I'd download to my computer later to make an application map. | |
|
BBI spreader w/ Teejet ISO controller, need ideas for elegant solution
