|
| Attempting to add ag leader control to an older speed and pressure sprayer. Need help identifying harness options. I have everything back to the liquid product module, as well as a raven flow meter, servo, section valves, and raven harness 11150171055 (3 section, servo and flow meter) that ends in a male 18 pin AMP plug (female pins). I am looking for an ag leader harness that plugs into the LCM and gets power from the can line like a normal AL system.
At the moment the only route I know of is mimicking a raven 440 takeover kit, since that’s the boom control harness I have, and is plug and play with all of the raven plumbing parts. I can do this with AL harness 4001266. However that harness ends at the same gender 18 pin AMP connector that is on my boom harness. The AL diagram shows going the harness listed above going into the raven 440 console harness, which I assume is where they get power for boom controls also? Anyways, I don’t want to buy a console harness just to change genders and bring high current power when it’s already back there. Seems like AL would have their own generic harness to do this, and not a special “take over” harness.
Perhaps this is a question for sensor 1 with a couple pin outs? Hoping tedbear sees this one. Thanks all! | |
|
Ag leader liquid control harness question
