Jeffersonville, OH | 1066smoker - 1/31/2026 11:50
It was running fine before changing the filters, so I’d think that the pickup tube is fine, but I won’t rule it out.
Half tank or so of fuel…that was my next stop, fill it full and hope that solves the issue. Unfortunately that means moving some more snow to get the service truck out.
I would try filling the first "spin on" filter first, we normally do, maybe it will get you going for now. If so, and it can't pump fuel without being full, I would think it could be the issue.
Once you get it primed, the transfer pump on the back of the high pressure pump takes care of any fuel pressure...
Chris |
Bleeding fuel on a MF8670 (8.4Sisu)
