|
NW Iowa | Stainless has always been a poorer steel to hold an edge.
I prefer high carbon D2 tool steel 60-62hrc.
Better strength and edge retention. Hand sharpen
Better than 154CM or 440C
If you are going to be rough but want an edge 8Cr14MoV. Kershaw emerson
You can sharpen with a grinder
Down side to high carbon, is they will rust if left folded looking
like a dumpster fire....
If you wipe them off they are fine.
Edit-
Properties Of 8Cr14MoV Steel
8Cr14MoV Steel Hardness
8Cr14MoV stainless steel hardness is 58-59 HRC as per the Rockwell hardness scale. This hardness level is high enough to give its blades good edge retention, sharpness, and wear resistance.
Also, the hardness of 8Cr14MoV blades differ depending on the process used by the manufacturer.
8Cr14MoV Steel Edge Retention
8Cr14MoV stainless steel retains a sharp edge for a long time, which is one of the properties that make knives made of this steel stand out considering their low prices.
With the high hardness level attributed to the Carbon and chromium in its composition, blades made of this steel stay sharp for a long time, even with frequent use.
8Cr14MoV Steel Wear Resistance
The decent amounts of Carbon, chromium, and vanadium in this steel give it higher wear resistance than other low-budget steel types.
Blades made from this steel can withstand abrasion and rough applications. Therefore, you can trust 8Cr14MoV stainless steel knives to serve you for a long time.
8Cr14MoV Toughness
The toughness of steel is key in determining how it reacts to tough applications, which would lead to chipping or breaking. 8Cr14MoV stainless steel has decent toughness thanks to the chromium and molybdenum in its composition.
8Cr14MoV steel knives can withstand moderate abuse; they will serve you best if you use them for normal cutting jobs. If you expose them to batoning and other very tough cutting jobs, they will break and chip in no time.
8Cr14MoV Steel Corrosion Resistance
Being stainless steel with more than 16% Chromium, 8Cr14MoV steel offers excellent corrosion resistance. You can use blades made from this steel in humid, wet, and marine environments without worrying about stains or rust.
It is because of this property that this steel is preferred in making kitchen and EDC knives. Also, to boost its corrosion resistance, everyday care and maintenance is essential. Wash and dry the blades after use.
Ease Of Sharpening 8Cr14Mov Steel
8Cr14MoV is hard steel, but not very hard to make it difficult to sharpen. You can get a sharp edge with this steel quickly using simple sharpening tools.
If you are on the market looking for a low-budget knife, which does not require frequent sharpening and is easy to sharpen, the varieties of 8Cr14MoV will never disappoint you.
Edited by Massey1155 12/13/2025 18:07
| |
|
pocket knife?
