|
Rushville, Indiana | Currently pricing equipment and in the middle of a finisher remodel. Wondering if any of you guys have experience with these particular feeders and style of gates I’m attaching pictures of. Pretty new designs to me. Don’t want to waste money on expensive things, and end up with junk I hate. If I can afford it, the goal is to go with 100% SS on everything. Absolutely everything. This is the last time I’m going to do this. As for the boy, idk. Maybe he’ll be smart enough to go get a real job, do important things, make big money. If not, he’ll have a 40 year old useless liability. Also, is there anything worth putting under the feeders that isn’t a pain to help with wear on slats? Or just pour a pad? Thanks gentlemen. Hopefully someone here is a lot smarter than me, and done it a lot longer. Both of which won’t be hard to accomplish.
Edited by 82%WIRETIE 12/7/2025 22:27
 (IMG_0766 (full).png)
 (IMG_0767 (full).png)
Attachments
----------------
 IMG_0766 (full).png (151KB - 3 downloads)
IMG_0767 (full).png (42KB - 2 downloads)
| |
|
Finisher REMODEL Stainless Steel
