AgTalk Home
AgTalk Home
Search Forums | Classifieds (1) | Skins | Language
You are logged in as a guest. ( logon | register )

Direct bury grain pits?
View previous thread :: View next thread
   Forums List -> Crop TalkMessage format
 
PearTrees
Posted 10/26/2025 15:52 (#11413871 - in reply to #11413744)
Subject: RE: Direct bury grain pits?


Northwest IOWA
We have a Lowry 500 bu pit- it's Almost 12 ft deep in ground .I have a Sump pump at 12.5 ft depth. The pit has a 12 inch auger that turns about 200rpm -We dug the hole and set it in ground in 1997- then backfilled around it with 90tons of pea rock.The 12 inch auger flighting was pulled out and replaced after 23 years- still had the original wood block bearing at the bottom. If I was to do this again - I would go with a poured wall " basement " and set an insert in. Agri Steel of Lyle Minn has done 5 or 6 of this style in our area- iv helped with pouring walls on one of them - and some of the millwright work. These are large enough to dump a semi - and hustle back to the field .
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)