|
Central PA | New to me is a gleaner R66 wired for ag leader. previous owner used an IC1200 and adapter cable as the combine display cable was for legacy integra display. previous owner used a 1500 antenna on waas.
we use a ic1200 and a IC800 on terrastar c pro on tractors which we can switch, but dont expect to need steering or higher precision on the combine. if we go this route we will need to get the display adapter cable and the antenna cable to use the in command (about $400) . we do records on agfiniti.
to avoid switching displays and antennas when we may need those tractors for fall planting, I thought maybe getting an integra and a 7500 antenna on terra star L . we will still need the new antenna cable for the newer antenna.
would i be better off with the integra and 7500 ? and is there any issues with getting integra data into agfiniti? should we just do the display swap when needed? after using in commands, will using an integra be ackward?
p.s. the combine does have a valve for steering.
| |
|
Ag leader combine monitor choices
