|
SW Iowa | You are correct in the second question. Export from Gen4 to USB first. There will be a folder on the USB called "Gen4". Zip this folder and then upload to "Files" page in op center. It will import the setup data as fields and boundaries. Then go to Setup > Setup File Creator to export as setup data for 2630. Remember that your setup file will need to include all equipment and fields needed for your tractor/combine/sprayer as you cannot add to a setup file later on the 2630.
Alternatively, if you have a 4640 universal, you can connect it to wifi and turn on data sync setup data from op center and it will upload all fields and boundaries over wifi, then export those as a setup file for a 2630. | |
|
Data from 4640 display to GS3 commandarm
