Oliver1 - 9/6/2025 14:24

Both from a 1385 Batco.

Tree came down during high wind storm July 28, so doing some repair work.

Idler roller

Drive roller. The pop-rivets are worn off, we are drilling them out and replacing them with new. I would be happier with less of a gap in the seam, can't recall if that was something we did years ago, or had done. Since it's glued and tight, we aren't going to mess with it, just re-rivet.

My earlier post about being a day earlier was we just got done refurbishing the 1314 that feeds the 1385, I forgot we had a drive roller here also!