|
| I just went through this this spring. When I bought our TigerMateII new in 2008, it had the bolt on sweeps, we ran those for a few years, I liked how they ran totally flat or parallel to the ground. Then we switched to the Nichols knock on, which stayed on great, but I noticed that they don’t run flat, but rather tip down a little bit. Then after a few years I saw a new 255 with the CaseIH knock on system and noticed that those sweeps ran nice and flat too. So I switched over to theirs, but soon grew very frustrated with loosing sweeps and we found that some sweeps go on farther than others, and those rubber keeper things are a total joke! I wanted to go back to Nichols, but they just don’t sit flat, and I think that’s important for a field cultivator to do a good job. So finally just gave up and went back to the ultra wing bolt ons, at least they run flat and don’t fall off. Don’t think we’ve ever lost one from cracking out from the bolt holes, maybe they’re getting tightened too much? | |
|
Considering bolt on sweeps for TigerMate 200
