Posted 3/28/2025 21:11 (#11165719 - in reply to #11165074) Subject: RE: 1770 vac motor plumbing? 2 fans in series?
IA
I put a dual fan setup on a kinze last season plumbed like this with tees from pressure lines to motors and return lines teed together, I teed the case drain into the hyd drive case drain line that was already there. Worked great. On the esets you want to be up around 20, esets are made to be run at a higher then a stock deere meter.
1770 vac motor plumbing? 2 fans in series?
