|
Butterfield, MN | It looks like it should work, but there was never a direct AccuBoom kit to work with the 844. You would have to get a generic AccuBoom kit and splice in the wires from the AccuBoom into the 844 console cable. You would have to run with the switches on the 844 system off and you would only have master sense, much like it would be on a Raven SCS console. You can always override a section on by turning the section switches on, but not override them off, other than manually deselecting the boom sections from being controlled on the Cruizer II (which isn't especially convenient). | |
|