Posted 1/18/2017 18:07 (#5777074 - in reply to #5776238) Subject: RE: Trimble fmx 1000 for lightbar guidence questions
Set it up as a new implement. Make sure you save the harvest setup FIRST.
Make a new implement. If needed remove the harvest plug in and autopilot or what you may have had for guidance. If you had manual guidance leave it where it is as an active plugun.
Follow the prompts for making the new implement, geometry, etc.
When finished, save and that is it in a simplified version.
Trimble fmx 1000 for lightbar guidence questions
