just a tish NE of central ND | Biggest trick is to insert the pry tool only so it barely catches the rim and then dont pry it on as far as it goes without checking what position the tube is laying in. Then snap a visegrip on the rim so tire cant pop off again. Then insert the second bar and so forth as you go around the rim.
For me, it the very point of the bar that pinches the tube.After pumping the solution out several times you really get more conscense about it (:
I guess Im the odd guy out........ Ill put a little air in the tube so it "fluffs up" inside the tire and yet not so much as to casue any resistance to instaling the second bead.
Edited by School Of Hard Knock 11/7/2016 08:55
|
Tire repair question
