|
Central Illinois |
I move the tire for molboard plowing.
I have one that has slipped twice (after moving tire back in and putting dual back on).
The next time, I tightened the wedge up, lowered jack, drove in a few circles or figure 8's, then re-jacked and re-tightened bolts. Didn't slip that time.
This last time, I tightened the wedge, then hit the end of the axle with a sledge several times, then re-tightened bolts. Did this until I couldn't seem to get the bolts tighter. Just had some ends to finish with chisel plow, didn't seem to slip (yet). | |
|
J D wheel wedges
