|
NW Ohio | By same thing I am assuming you are using a TMX on a Gold Digger plow with their valve.
Their valve is a PWM valve. Their cable to the valve has 2 leads each. One is ground, one is hot. Not sure of the color scheme but one side is raise, one side is lower. Take a test light or multi-meter and find out which cable is hot/raise and hot/lower. Hot raise is connects to the orange cable on the Trimble valve module, hot/lower connects to the yellow cable and both grounds to the black cable.
Set it up in WM-Drain as a PWM valve and calibrate it. | |
|