| 260david437 - 7/20/2016 06:19
The motor mount on my skid loader came off and the engine dropped down and the oil pan rubbed around were the drain hose goes in. I put jb weld on it but it is hard to get it to stay in place and I still have a small leak. I don't really want to pull the engine, is there something like bathtub caulk that would hold up to the oil or should I try the jb weld again Drain the oil after motor is hot once ,then tip machine away from the hole and heat with a torch to burn oil out of spot,then JB weld and let sit overnight. |
Stoping an oil leak on a oil pan
