Posted 7/19/2016 20:37 (#5420517 - in reply to #5419963) Subject: RE: How do I pull wires out of my Concaves
Dodge County, WI
I got all except one out. Cranked the snot out of the vise grips and used a pry bar under the vise grips and worked it out. Once you get them part way out they come out pretty good for the most part.
The one I couldn't get out was in a section that the crossmembers were tweaked from something getting in there. My guess is the holes are tweaked and not letting the wire move.
How do I pull wires out of my Concaves
