|
West Central Iowa | Here are few shots of the Buhler brand joystick mounted in my 7120. I removed the console side cover and welded a pair of coupling nuts to the side console frame to bolt the joystick to. When I reinstalled the side cover I put two small holes in it for the nuts to pass through. If I was to do it over again, I think I would locate it just a little farther rearward, because at low throttle settings the joystick lever will hit the throttle lever when rolling the bucket. Not a real big problem, as I usually have the tractor revved up at least a little when doing loader work. And it makes a good place to mount the drink holder to.
Edit for spelling.
Edited by pirlbeck 6/20/2016 06:29
(IMG_1045.JPG)
(IMG_1037.jpg)
(IMG_1038.jpg)
(IMG_1041.jpg)
Attachments ---------------- IMG_1045.JPG (75KB - 42 downloads) IMG_1037.jpg (46KB - 40 downloads) IMG_1038.jpg (68KB - 46 downloads) IMG_1041.jpg (57KB - 43 downloads)
| |
|