NW Missouri | Hey guys. I've figured out all the wiring for my tender and also replaced the gearbox on the Honda engine as the clutch was not working. Now I'm down to getting the throttle control working.
See attached pic of the piece that is controlled by the switch. It's basically a servo and reversing the 12v polarity reverses the motion, etc. This is (somehow?) hooked to the throttle control on the honda engine (gx160). The trouble is I don't have any schematics or pieces for the part that connects the servo with the throttle. It must be a common piece but I've been googling for hours with no luck.
Sorry, my real question is what is the mechanism that connects the below piece / server to the throttle control? I'm guessing a cable of some sort.
Edited by twabscs 5/30/2016 20:43
 (image.jpeg)
Attachments
----------------
 image.jpeg (59KB - 181 downloads)
|
Seed tender Honda engine throttle control servo
