|
Bow Island, Alberta | We have a couple pivots where we have VRI controls on a couple spans. Need a CAMS panel with the latest software. Also need a box at a tower, which will control up to 20 sprinklers in each direction from the box. These can be set to apply any percentage of water less than "on all the time"
Also have a few with "wide boundary" controls. These are sort of like end gun controls, and are controlled from a box on the tower as well. The sprinklers are either on or off for at least 2 degrees at a time.
Both of these systems are Valley. The expensive part is buying the valves to control each sprinkler (unless you don't have a CAMS panel, then you have to buy that first). | |
|