I think that is the version I am using. Doug (TruPointe) updated it several days before we started planting (April 18); I believe he said there was one more update that became available just as we got under way. The normal progression: Good cell strength, 12-14 sats, all throughputs at 100. Then RTK throughput drops to 60 or 70...20 or 10...0. NTRIP disconnects, fall back to WAAS, sats now 6 to 8 (no GLONASS). NTRIP sends query stream, waits. SBAS close to timing out. NTRIP connects, convergence is fast, throughput back to 100. Back to RTK fixed. This takes a minute or two to play out and can happen every three minutes. Or, you may go a few hours between glitches. When it gets really bad, I have rebooted Geosteer. May be a coincidence...but sometimes that seems to help. |