|
Butterfield, MN | You can definitely add a Raven console and serially connect it to a 2600 to get the documentation you're looking for. A 450 would probably be the best and most affordable, especially if you can find a used one. Still, you'll want to see what type of plug you have coming from the sprayer to know if that's going to work. You'll want to have a round 16-pin (cavities, not all will necessarily be populated) connector for that to work. The downside to doing it this way is that you're not going to be able to get automatic section control. You're going to have to manually turn the section switches on and off. To get automatic section control, and this is where someone smarter than me on the Deere side will have to chime in, you'd want to go with a Greenstar Rate Controller, which is the JD application control. Then you'd probably still need to get an unlock for section control, but again, someone may be able to correct me. | |
|