|
Ullin, Illinois | If you already have deere hardware why use agleader to map with? Use the Integra and intellislope to control the plow it will operate with 3000 receiver. Use the deere harware you have and get rtk. You don't need to map the whole field, but you can if you wish just use the intellislope to read the "line or slope you need" before you plow it turn around and lay the tile. Deere currently does not make a tile plow software. But if you are wanting water management you have pct Terra Cutta as another option instead of surface water pro. Terra Cutta is a land forming software made for deere and is pretty top notch. Another idea is check and see if you have LIDAR maps avaliable in your area if so that will be better than any topo map you can create.
Don't currently own a tile plow but have done alot of research and made several phone calls.
Edited by bnelu 11/22/2015 21:06
| |
|
|