|
LUMBERTON NC | Auger will not swing in or out with the switch on the collum..... First things first both position sensers have been bypassed the one at the auger pivot and the one at the back at the auger saddle ... Both are wired together.... I can take a piece of wire and hot swing the auger out or in ... By touching the proper solenoid.... The steering collum switch tests good ... And can apply power with a hot wire to the switch plug I can get it to swing out .... But then I can't get it to swing in the same way...…also with a test light I find I am not getting power up to the switch for it to work..all fuses test good tooo ..so where does the power come from to power the swing circuit...and then can't get it to swing in with a jumper wire .. Help me please thanks Ihsmoke | |
|