|
| If you want to pull the pan you will need to unbolt front axle and jack up tractor to get it out. If your paying for shop time, it might be a consideration. 5500 does not sound like a lot to me either. Not knowing anything about your tractor I would be inclined to wait until 6500 and then do the liners as well. I thought I was taking good care of the coolant but I still cavitated one at roughly 7000. This was in an 895. FWIW
Edited by george10 5/29/2015 07:49
| |
|
855 Cummins Crank bearings?
