Posted 6/4/2015 10:15 (#4608248 - in reply to #4598742) Subject: RE: Wiring SteerCommand to New Holland T7.245
Iowa Falls, IA and Sauk Centre, MN
If the button is on the circuit board, I definitely don't want to mess with that. The steercommand system will utilize a harness that connects into the Accu guide and Intelisteer 20 pin harness connector. somewhere on the connector on the AccuGuide/intellisteer 20 pin harness, there has to be 2 pins I hope for the NH auto steer button on the joystick