|
Windom, MN | We have a 2010 Case IH 245 that has a loose electrical connection somewhere. When I turn the flashers on, the whole right side doesn't work all the time. When going down the road, if I hit a bump just right, all the flashers will work. Then I will hit a bump again and they will quit. I assume it is a loose connection, but where should I start looking?
When they assembled this tractor, whoever did the electrical work must have done a poor job. 2 years ago we were having a problem with the implement plug, opened it up and found that 3 of the screws that hold the wires in the plug were loose or never tightened.
Thanks for any help you can offer. | |
|
Looking for loose electical connection 245
