|
| There should be a cable listed in the cabling guide for Deere tractors.(Cabling guide is online at trimble. Com) I assume they run iso so you should be able to use tractor valves. Or at least the valves on the tractor if you don't have iso. (We have a challenger) You can run with just height control and we have done it successfully but it is not that much to ad the IMD slope control module. They are 1700 + an unlock 800 I think. Check your low gear speed can you run at 1mph without being at little more than idle most can not. We had ours on a 9682 NH and flamed out all the time. With the cat 955b we can run at 1800 rpms at 1 mph with some slip plus the engine is not derated so we get full HP. Just some of our experiences.
 (img_20140808_112715073.jpg)
Attachments
----------------
 img_20140808_112715073.jpg (127KB - 76 downloads)
| |
|
|
Trimble FMX, John Deere 9430, Crary Tile Plow
