|
| I have a Field IQ system on a CFX 750 and a 30 foot knife rig. The system will work great for several rounds and then all of a sudden in the middle of a pass it will pop up a warning "Speed to slow for safe operation. Please speed up" after acknowledging this message a second message will pop up saying "one or more Field IQ devices has been disconnected" What could be causing this? We have applied several tank loads with this system and the overall weights have been calculating out to the proper applied rates. The CFX750 shows a speed that is within .1 mph of the corner post in the tractor cab. Normally I can toggle the master switch off and then back on a couple times and get going again. This problem is just getting a little annoying.
TIA for any ideas that could be causing this problem. | |
|