Posted 10/23/2014 22:22 (#4142313 - in reply to #4142199) Subject: RE: Lexion 3D sieve only works when leaning to the left.
Mid-Missouri
You have completely verified the grain loss on the ground for each side....not just using the monitor?
Do this at idle preferably with the straw chopper folded off....
On the level the sieve should shake straight. The arm on the right should be perpendicular to machine.
Park on a slope, sieve should shake uphill
turn machine on opposite slope...ditto.
Does the chaffer on left and right match....linkage properly adjusted?