|
Northern Indiana | I have run a 925 on my 7720 with no problems. This year I bought a 925 with an AWS wind system on it. Today I put it on and the right side(opposite of the aws drive system) rides about 3" off the ground when cutting. I override the automatic header height I can get the whole cutter bar on the ground but then the left side is "smearing" the ground.
I checked the tires air pressure is equal. Is a 925 with a wind system too much for a 7720? Any suggestions appreciated. | |
|
925 with air wand system on a 7720 won't sit level.
