|
Magnolia, KY | I have struggled with the same problem for 3 years. Do you have a code 110 check wiring by chance? I solved the issue thanks to reading some previous threads here on NAT by replacing the terminator at the end of the harness back on the drill (mine is TBT...your terminator would be on the cart if it is TBH). There is also another terminator on the harness in the cab identical to the one on the other end of the harness. The terminator is around $120 and will likely cure your issues. Good luck and post back what heals your issue.
Edited by Caleb1456 9/1/2014 21:12
| |
|