|
North west MN | I find the Ez-Steer works almost better on combines than tractors maybe something to do with the rear steer. Make sure your t2 controller firmware is the latest. The controller firmware is in the menus under controller then diagnostics I think the latest is 3.01 for the controller and 3.10 for the ez-guide. Make sure you have it set up as a combine make sure you have the controller mounted in the direction that you have it setup in the controller settings. Measure the distance from the front axle to the GPS Antonia
Here is the link to settings for the EZ-steer
http://trl.trimble.com/docushare/dsweb/Get/Document-211288/Ag_CUST_... | |
|