Columbia Basin, Ephrata, WA | The auger fold linkage on those leaves something to be desired. Ours cracked and has been welded and extra reinforcement added. The only other place our cart has welds is the carrier bearing on the pto shaft where it hangs out in space between the hitch and the gearbox. Someone put it on a tractor with the drawbar set too short and it pushed the pto assembly back toward the gearbox breaking the bearing hanger. Look over the entire pto assembly, because even with the drawbar set the right length you can bottom out the pto if driving through a terrace channel or similar ditch. If it bottoms out hard enough it can bend the shaft.
|
Brent 874
